Cartridge for Return Line Filter
Models : CRLF 04 10,CRLF 04 25, CRLF 05 10, CRLF 05 25, CRLF 06 10, CRLF 06 25, CRLF 08 10, CRLF 08 25, CRLF 10 10, CRLF 10 25,CRLF 12 25
CRLF 04 10
CRLF 04 25
CRLF 05 10
CRLF 05 25
CRLF 06 10
CRLF 06 25
CRLF 08 10
CRLF 08 25
CRLF 10 10
CRLF 10 25
CRLF 12 25
Return Line Filter
The RLF series of low cost return line filters is intended for direct mounting on hydraulic reservoirs. The low profile coupled with high flow ratings, helps in mobile installations besides stationary applications like machine tools, plastic machinery, etc. It requires one inlet fitting and discharges directly into the reservoir
This assembly is used for periodic checking and charging of accumulator pressure. A steel body construction is provided with charging valves and a pressure gauge. The assembly is suitable for pressures upto 210 bar. A two metres long high pressure hose pipe is provided with the assembly.
Gauge Isolator Valve(Multi Station)
HYDAX introduces for the first time anywhere, single block 2, 3 or 4 stations gauge isolator valves. The valves are designed to prevent surge damage to a gauge in all types of hydraulic circuits. The spring returned facility is the same as in a single station valve. The high performance, low drain leakage characteristic is maintained in the multi-station valves. Only one gauge and one drain line for all the ports reduces plumbing and additional instrumentation cost.
Double Pilot Check Valve
In a free flow direction through the inlet, the ball is unseated the flow is out of the cylinder port. When the control valve is centered, the load is locked.
Flexible Drive Coupling
The Hydax Flexible Drive Coupling consists of two gear hubs engaging in a sleeve of high grade plastic material. has superior strength and a wide operating temperature range. The gears have crowned-tooth form which permit axial and angular misalignment. The couplings have undergone extensive testing under severe load conditions.
Filler Breather Assembly
This is a combination unit for filtering air displacement from the reservoir and for straining oil while filling. Mounting options include Tank Top and Side Mounting. The displacement capacity is 250 LPM and 700 LPM and filtration is upto 40 microns. The air displacement from underneath the cap assembly improves performance. Power coated cap and nylon or nickel-chrome plated strainer body ensures corrosion resistance.
Return Line Filter – Spin On
The filter is intended for direct mounting on hydraulic reservoirs in mobile installations and machine tool application and can be used with any minerals and petroleum based oils. It requires one inlet fittings and discharges directly into reservoirs
Filler Breather Assembly (Nylon)
This assembly is a combination unit for filtering air displacement from the reservoir and straining oil while filling. It is for use with Hydraulic/Lubrication oil reservoir applications, including machine tools, mobile equipment, industrial machinery, construction, mining, marine and agricultural applications etc. Breather-filters are a must for hydraulic systems ensuring clean air and oil passing into the reservoir
Water Filter Housing
The housing is made of Fiberglass Reinforced Plastic (FRP) and the housings have an internal lining. The inlet and outlet ports are located at the bottom cover and have BSP threading. The design provides for easy disassembling in order to clean and change the cartridge. The housings are suitable to accommodate double open ended (DOE) and ‘O’ Ring cartridge configurations.
Single Pilot Check Valve