Electrochemical Deburring Machine
Single Pilot Check Valve
Gauge Isolator Valve(Multi Station)
HYDAX introduces for the first time anywhere, single block 2, 3 or 4 stations gauge isolator valves. The valves are designed to prevent surge damage to a gauge in all types of hydraulic circuits. The spring returned facility is the same as in a single station valve. The high performance, low drain leakage characteristic is maintained in the multi-station valves. Only one gauge and one drain line for all the ports reduces plumbing and additional instrumentation cost.
This assembly is used for periodic checking and charging of accumulator pressure. A steel body construction is provided with charging valves and a pressure gauge. The assembly is suitable for pressures upto 210 bar. A two metres long high pressure hose pipe is provided with the assembly.
Filler Breather Assembly
This is a combination unit for filtering air displacement from the reservoir and for straining oil while filling. Mounting options include Tank Top and Side Mounting. The displacement capacity is 250 LPM and 700 LPM and filtration is upto 40 microns. The air displacement from underneath the cap assembly improves performance. Power coated cap and nylon or nickel-chrome plated strainer body ensures corrosion resistance.
Flexible Drive Coupling
The Hydax Flexible Drive Coupling consists of two gear hubs engaging in a sleeve of high grade plastic material. has superior strength and a wide operating temperature range. The gears have crowned-tooth form which permit axial and angular misalignment. The couplings have undergone extensive testing under severe load conditions.
A complete range of Suction Strainers suitable for flows from 15 LPM (3gpm) to 450 LPM (100gpm). The standard filtration is upto 125 microns. The construction incorporates a stainless steel filtering media with a steel back-up perforated sheet held together with free flow epoxy bonding material.
Fluid Level Gauge (SGR Series)
Hydax introduces a newly designed Fluid Level Gauge of robust construction, bigger size and ‘O’ Ring sealing made from aluminium and glass-filled nylon. These level gauges are easy to install. Supplied in ready assembled condition it needs drilling of 2 holes to instal the gauges. Surface on which it is being installed should be level and of smooth finish. Sizes available are 76mm, 127mm, 178mm, 254mm and 356mm between bolt centres. These Level Gauges also have the options of heat dial / thermometer temperature indicator.
Water Filter Housing
The housing is made of Fiberglass Reinforced Plastic (FRP) and the housings have an internal lining. The inlet and outlet ports are located at the bottom cover and have BSP threading. The design provides for easy disassembling in order to clean and change the cartridge. The housings are suitable to accommodate double open ended (DOE) and ‘O’ Ring cartridge configurations.
Double Pilot Check Valve
In a free flow direction through the inlet, the ball is unseated the flow is out of the cylinder port. When the control valve is centered, the load is locked.
Filler Breather Assembly (Nylon)
This assembly is a combination unit for filtering air displacement from the reservoir and straining oil while filling. It is for use with Hydraulic/Lubrication oil reservoir applications, including machine tools, mobile equipment, industrial machinery, construction, mining, marine and agricultural applications etc. Breather-filters are a must for hydraulic systems ensuring clean air and oil passing into the reservoir